1 / 1
Remixed EBB42 Mount for Microswiss NG extruder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I remixed this to shed some weight and give it what I thought was a better look.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 232
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I made some cutouts to shed some weight and give it a better look IMO. I also did away with the heatset inserts. I built in standoffs and sized the holes to simply screw m3 screws right in. I printed it in Overture Black PETG and it has worked well for me. The m3 SCHC screws I used threaded in with little effort and have held well for over 100 hours of printing in a ~50-55c enclosure.
I printed it in the orientation of the model with painted supports on the horizontal near the top.