Loco Robo Battery Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement battery cover for the Loco Robo Rover (https://locorobo.co/)
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 57
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
My wife uses Loco Robo rovers at her school. As with everything that requires batteries, a battery cover was lost and she asked me to create a new one.
A few years ago Katz Creates built a BMO from Adventure Time and they used an awesome design on the butt flap latch. I borrowed their design and adapted it to what I needed. This design allows the cover to be printed flat and the latch is printed on its side as a separate part. This takes advantage of layer lines.
The cover only needs supports for the 3 small taps.
The latch needs no supports.
Once printed, the latch can be glued into the cover.
Once glued together, the battery cover fits perfectly and snaps into place.