1 / 4
S5 Schrauben Ablänghilfe / S5 screw cutting aid — zdjęcie 1
1 / 4

S5 Schrauben Ablänghilfe / S5 screw cutting aid

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Helfer zum Schrauben ablängen / helper for cutting screws

Ocena
0 / 5
Polubienia
3
Pobrania
10
Wydruki
0
Wyświetlenia
88
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Ich musste mir einige S5x25 Schrauben für ein Projekt ablängen. Um mir das messen an jeder einzelnen Schrauben zu sparen habe ich mir ein Spannblock gedruckt um einen Anschlag zum Absägen der Schrauben zu haben. 

Einfach Schraube einstecken und im Schraubstock festklemmen und an der Kante herunter schneiden.

Diese Ablänghilfe ist für S5x16 (Schraubenlänge nach dem ablängen).

Ich habe es in PETG ohne Stützmaterial gedruckt.

 

I had to cut some S5x25 screws for a project. To save myself the trouble of measuring each individual screw, I printed a clamping block to have a stop for sawing off the screws.

Simply insert the screw, clamp it in the vice and cut down along the edge.

This cutting aid is for S5x16 (screw length after cutting).

I printed it in PETG without support material.

Tagi