1 / 1
Noisemaker - Ratchet
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution
Self designed ratchet as single print without support.
Version2 with
- improved handle stability,
- oval holes at sides for better print quality at bridges
- increased bottem phase at turning part to prevent it from sticking to housing
settings:
- Pre-settings Prusament PETG
- Material: PETG
- layer hight: 0.2mm
- infill: 15% Gyroid
- wall thickness: 5
- bottom layer: 5
- top layer: 5
importent hints:
- the part might be hardly turning right after printing.
- try carefully to turn it more and more.
- if the bottom is sticking together, try to cut it carefully with sharp knife.
- rotate it for a while until it turns more easlily