Twilight Imperium 4 Organizer (incl. Prophecy of Kings)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an organizer for the board game Twilight Imperium 4th Edition and its expansion Prophecy of Kings. It is a…
- Ocena
- 4,5 / 5
- Polubienia
- 84
- Pobrania
- 782
- Wydruki
- 4
- Wyświetlenia
- 6552
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an organizer for the board game Twilight Imperium 4th Edition and its expansion Prophecy of Kings.
It is a remix of my previous organizer (https://www.thingiverse.com/thing:4534520), so you can keep the already printed faction boxes and just need a couple more (1x Muaat and 6 regular ones).
The inlay will work with sleeved cards, however, I used rather thin and tight fitting sleeves, so you might want to check that (https://www.docsmagic.de/100-Docsmagicde-Mini-American-Board-Game-Sleeves-41-x-63-Small-US-43-x-65-Brettspielhuellen).
Here's what you need to print:
8x Player: Holds all player colored pieces, cards, and a set of dice. Note: The Warsuns only fit disassembled!
23x Faction: Holds all faction-specific cards, tokens, and the home system.
1x Muaat: It's a deeper version to fit the Muaat Supernova.
24x Faction_Lid: There are 3 versions with different tolerances. I'd suggest print the 0,2mm version and then depending on whether it fits to loose/tight try the others.
2x Res: Holds all trade good/commodity, infantry, and fighter tokens as well as some cards (I put the secret objectives and artifacts in there).
1x System: Holds all regular system tiles (blue back).
1x Hazards: Holds all hazard tiles (red back).
1x Hyperlanes: Holds all hyperlane tiles.
3x Hex_Lid: There are 4 versions with different tolerances. I used the 0,0mm version but you can try which fits best for your printer settings.
1x Cards: This holds the action and exploration cards as well as the remaining tokens.
2x Cards_Single: These hold the agenda and planet cards.
Let me know if you have any questions or comments.
Print Settings
Printer Brand:
Creality
Printer:
CR-10S
No
Supports:
No
0.6
Filament: yourDroid PLA+ Black
Notes:
Used a 0.8mm nozzle.
Category: Toy & Game Accessories