Sony Xperia 10 III case for Interrailers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
In case you're travelling in a train or bus with limited cell reception, this handy suction cup case is here to help.…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 161
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution
In case you're travelling in a train or bus with limited cell reception, this handy suction cup case is here to help. Just enable tethering on your mobile and attach your phone to the window, optimally in the upper part of the window and enjoy higher data rates and less outages!
I used these DIYexpert® threaded suction cups of size Ø50mm/M4x10mm.
Print Settings
- Supports: Yes, on the bed only
- Resolution: 0.2mm layer height
- Filament: PLA or PETG
OpenSCAD notes
Original model can be found on my GitHub.
OpenSCAD 2021.01 was unable to render the model with the original STL file made by bunjii. The original has some broken geometry. But it's possible to export it without the original model and combine them in PrusaSlicer. Remember to use merge feature, otherwise the overlapping geometries will cause a print failure.
Category: Mobile Phone