Kanban EV Organizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an organizer for the boardgame Kanban EV. Just print one of each and you can use sleeved cards and can get rid…
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 90
- Wydruki
- 4
- Wyświetlenia
- 1249
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an organizer for the boardgame Kanban EV.
Just print one of each and you can use sleeved cards and can get rid of all the baggies.
The Setup box doubles as a book/speecharger bowl during the game.
I put the speedcharger boards on top of the main board and left one of the large punchboards underneath the inlay to minimize the gap inside the box. That way nothing should shift around when storing it vertically.
Let me know if you have any questions or comments and don't forget to post your make.
Note: I have changed the Cards and Parts boxes after printing a bit and am currently printing the new and improved version.
Print Settings
Printer Brand:
Creality
Printer:
CR-10S
No
Supports:
No
0.6
Filament: yourDroid PLA white
Notes:
Used a 0.8mm nozzle and adaptive layers (0.3mm) for the boxes with rounded bottoms.
Category: Toy & Game Accessories