Noseband tightness measuring device based on FEI 2024 dimensions
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Device for measuring horse noseband at home before entering a FEI competition
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 194
- Wydruki
- 0
- Wyświetlenia
- 829
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Public Domain
Stick for measuring horse noseband tightness in FEI competitions. Based on FEI 2024 released measurements.
Design altered from original FEI device for easier printing. Follows main FEI measures. Height 17mm width on top 25mm.
The device should be same size as FEI defines it. However I do not take any responsibility if you measure the noseband too tight on a competition (with the official FEI device) after measuring with this device.
PLA, Layer height 0.2, infill 15%. Just basic setting. No supports needed.
Print on the side without the slot facing to the print bed. Remember to tilt the model on it's side.
edit: I added another version (noseband_measurement_v11) with a hole instead of a dent. This can be printed on either side.
edit 2: Added a version (noseband_measurement_v12) with hole which should be easy to print on either side.