Ant: Print in Place AND Tight!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A giant ant for Halloween. Easy print-in-place and tight with a twist.
- Ocena
- 4,667 / 5
- Polubienia
- 86
- Pobrania
- 354
- Wydruki
- 3
- Wyświetlenia
- 1650
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
this is another example of use of my new print-in-place AND tight joints
Print with 0.4 nozzle, 0.2 layer height, 4 walls, no brim, no support, arachne. Do not scale (or scale the layer height too!). Model prints in 2:30 in single color. 3:30 when i paint it.
Your printer must be well calibrated. You can get more instructions and a quick test model here: https://www.printables.com/model/1025365-black-panther-print-in-place-and-posable
How to put the legs in tight position: that is fairly simple: first remove the built in supports below each ball joint. Then twist the leg by 90 degrees, it is ready. You can now move the leg as you wish, it will stay in place.
For the head: double twist (as for the panther).
MAKE SURE YOUR FILAMENT IS DRY AND THE PRINT COLD WHEN YOU TWIST THE LEGS. Or it may break if it is soft as chewing gum.
How I made this?
- i designed the joints with OPENSCAD
- I used RODIN to design ant https://hyperhuman.top/r/YFR1RTVD (get a 50% discount on credits using this link)
- I used Window 3d builder to cut and assemble the parts.
PLEASE LIKE COMMENT POST YOUR MAKES! THANKS!