Emil Thumbstick Cap for Xbox Controllers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Play the NieR games with even more immersion.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 233
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
WARNING: More for novelty. The base of these is the MS Accessibility base, which is designed to go on, and not really come off, and may damage older thumb sticks on removal. I may make a design that replaces the entire thumb stick cap in the future.
Emil, being one of the best characters of NieR (of which there are many amazing characters) was kinda 90% of the way to an accessibility controller adapter, so, I went that last 10 percent. Attached is both the STL, and a MMU3 3mf with recommended supports. It actually works rather well and the longer thumb sticks really give a nice feel to aiming. TO NOTE: Again, the base is the MS Accessibility design. It's not designed to pop on and off, and may damage some thumb sticks on removal. You may get better results printing it with a more ductile filament, like PETG or ABS.
Print at .2mm nozzle height, and lightning is actually a rather fine infill for this.