1 / 1
Prusa XL Y-Carriage for Toothed Idlers (old O-Rings) — zdjęcie 1

Prusa XL Y-Carriage for Toothed Idlers (old O-Rings)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Update for Prusa XL - Y-Carriage for Toothed Idlers

Ocena
0 / 5
Polubienia
6
Pobrania
38
Wydruki
0
Wyświetlenia
735
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v2.0

Attention: This ist for the old O-Rings! I will make new Version for the new O-Rings soon.


This is a remix from @racerethan (Prusa XL Left and Right Carriage With Gates 20t Idlers 3mm von racerethan | Kostenloses STL-Modell herunterladen | Printables.com)

I remixed it, because the clearance for the X-Carriage is not enough and the X-Carriage can not home anymore. With the remix you should be able to home.

 

I like the design most because:

  • toothed idler (20t 6mm belt 3mm id for prusa) for more rea
  • printing with good dialed in pccf is way better then the stock parts (gantry alignment is better in my case!)


Further mods:

As @racerethan mentioned, it make sense to install this mod also https://www.printables.com/model/683762-prusa-xl-modified-corexy-back-parts

 

Parts:

Idler:

meltbro - GT2 Umlenkrolle, Pulleye, 20 Zähne 3mm/M3 Bohrung für 6mm Zahnriemen, 2GT 

Alternative:

 https://www.filastruder.com/products/gates-2gt-idler?_pos=1&_sid=1d42bf29e&_ss=r&variant=32673878442055 (the 6mm 3mm id for prusa one).

You can reuse the old screws. I recommend to buy 8 x M3 nuts (like the original ones), so you have the old ones as backup.

 

Print settings recommendation:

My settings: 0.20mm STRUCTURAL, 7 perimeters, 30% Gyroid infill

Prusa: 0.20mm STRUCTURAL, 4 perimeters, 30% Grid infill

Tagi