Dual ended pen for Schneider Take 4 refils, or for one such refil and a graphite pencil lead
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dual ended pen for Schneider Take 4 refils. 2 designs, one for 2 ballpoint refills, the other for a ballpoint and pencil
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 163
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
This is 2 different designs: One for 2 ballpoint refils, the other for a ballpoint refill and a mechanical pencil lead.
The file named V3 is a dual ended pen, it should fit Schneider Take 4 refills, 90 mm long 3 mm diameter. The pen body is shorter then 2 of the refills together would be, because they overlap in the middle.
It's named V3 because it was the 3rd try getting it to fit the refills with my printers tolerances. Your printer might vary - use the openScad file to modify. Perhaps even print a small test piece first.
The other file named D2_V0 is inspired by https://www.printables.com/model/129382-pencil-for-graphite-leads-2mm/files. It is version 0, it is too short to fit 2 ballpoint refills but can fit a ballpoint refil and a bit of 2 mm mechanical pencil lead (graphite).
By all means feel free to remix and improve. Both STL and .SCAD files available.
I found PLA pens not nice to hold, so I wraped them in acrylic wool, but perhaps other printer plastics (TPU, PETG) have a nicer feel.