1 / 1
Z belt debris guards - Voron 2.4, Troodon 2 Pro, etc. — zdjęcie 1

Z belt debris guards - Voron 2.4, Troodon 2 Pro, etc.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple walls to prevent filament bits from falling into your Z axis pulleys.

Ocena
0 / 5
Polubienia
1
Pobrania
18
Wydruki
0
Wyświetlenia
286
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

 A super simple print for putting a tiny wall around the Z belt openings on a Voron 2.4 or Troodon 2 Pro style printer.  Print 4 of them.  They block bits and bobs from falling into the pulley hole.  You can glue them, or you can leave them just standing in place (depends on how windy your chamber is).  

Tagi