Janus - YEHW Samson titan barrel attachment
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Nerf Samson barrel that accepts "Titan barrels" for easy ammo type changes.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 465
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
With this barrel you can swap out dart types by screwing in different Titan barrels.
Keep in mind the air chamber and power of the spring/plunger tube is still just the same as the YEHW/Samson, so expect weak results if you're trying to fire 6+ darts. 5x half darts, full and half mega darts, full and 8cm MXL darts all work. (Titan barrel for 8cm MXL)
Titan barrels barely fit between the rail attachment at the bottom and the one at the top, resulting in thin walls in a few areas, so I recommend using at least PLA filament with 4-5 walls and 20% infill.
The barrel is modified from my Minimal reprints 8cm MXL Samson barrel, but it will work with regular Samson parts as well. You will need to print the shortened top rail, and file down some parts of the “Vundahbah”:
This section should be flat, not curved. You could also slice and reprint it. Filed/sliced versions are still compatible with the original Samson barrel.
You either need to print all the parts for the Samson minus the barrel, or follow the instructions for my version that uses the YEHW styling.