1 / 3
Screw-Top Flux Jar for Rugged Pinecil/TS100/TS80 Case (V2)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My take on a small flux jar that fits snugly into the extra space of the rugged Pinecil/TS100/TS80 case.
- Ocena
- 5 / 5
- Polubienia
- 38
- Pobrania
- 325
- Wydruki
- 13
- Wyświetlenia
- 1256
- Oceny
- 11
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 13) (Komentarze: 14)Remiksy (3)Kolekcje (48)Powiązane
This small container integrates screw threads and aligns perfectly with the empty space in the upper lid of the rugged Pinecil/TS100/TS80 case. This was designed to be pressure fit without needing to be secured with glue.
I can't attest to the water-tightness of the container but it should work well for flux.
It's my first model in FreeCAD so there might be some rough edges to work out. In the future I'd like to add some grippy edges on the lid to make it easier to open.
My print settings:
- PLA, 0.12 mm layer height (can use adaptive layer height, ideally want thinner layer height at the screw threads)
- 15% infill, gyroid (infill pattern doesn't matter)
- Printed on Ender 3 S1