1 / 4
RUGGED Box KREG XL DOUBLE Pocket Hole Jig carry case!! Fits Double Jig! — zdjęcie 1
1 / 4

RUGGED Box KREG XL DOUBLE Pocket Hole Jig carry case!! Fits Double Jig!

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

If you know you know!

Ocena
0 / 5
Polubienia
12
Pobrania
68
Wydruki
0
Wyświetlenia
671
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Print this awesome Rugged box design customised to perfectly fit your KREG XL pocket hole jig, drill bit & accessories! FITS DOUBLE JIG!!

For ideal results print the box halves in ASA/ABS or better. The clips in PETG & the Seal in TPU. 

Obviously print 2 latches! 

 

THIS IS AN XL MODEL - DON'T EXPECT TO PRINT IT ON A SMALL PRINTER! 
Thats really not gonna work is it.

 

All files to print at 0.2 layer height but probably be ok at 0.3.

These files fit my KREG XL, drill bit & other parts perfectly & I have been using this case out on jobs for months without a single issue! If you have problems please check your printer setup, & remember maybe my setup is different to yours. So please don't leave a bad review because your printer didn't print this model well. It works & fits perfectly.

You'll need x6 M3 30mm cap head bolts.