1 / 1
Shark WandVac WV200 Adapter for Vacuum Bags
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter for Shark Wandvac WV200 to deflate vacuum bags
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 93
- Wydruki
- 0
- Wyświetlenia
- 493
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (21)Powiązane
Model is designed with a 2.2 mm wall, to fit 5x0.4mm lines.
- Material: PETG
- Line Width: 0.4mm
- Wall Lines: 3 → no infill
- Flow Rate: 110%
- on my Snapmaker printer, I needed a little more material, otherwise the walls would separate
- Print the first 2 cm to check if you have the same issue.
- Printed with the WandVac side down