Drill for Transformers Studio Series 86 Brawn
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here's a fun little addon for Brawn from back in the wacky days of Generation 1 - the drill for his alt mode!
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 421
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Here's a fun little addon for Brawn from back in the wacky days of Generation 1 - the drill for his alt mode!
Sure was wild back in the day where our robotic friends could simply conjure up additional functional bits to solve any problems standing in their way! So this simple addon lets you do just that - attach a drill on the front of good ol' Brawn right here.
To make for easier printing and painting, and also so that the drill can be spun ( as all drilly things do), this set comes in the two separate parts of the Drill and the Mount.
A quick glance at the undercarriage shows how the two little tabs of the Mount piece are to be notched in. Just take note that these tabs are quite small and hence this should be printed with slightly higher print settings to make them more robust.
Well then, have a drilling good time with this simple addon kit. Happy 3d printing! =)