Barrel Cleaning Rod - Modular (Airsoft)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A modular, flexible airsoft 6mm barrel cleaning rod that can be disassembled for easier storage. When disassembled…
- Ocena
- 0 / 5
- Polubienia
- 46
- Pobrania
- 454
- Wydruki
- 0
- Wyświetlenia
- 1969
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A modular, flexible airsoft 6mm barrel cleaning rod that can be disassembled for easier storage. When disassembled each section is exactly 20 cm long.
Use soft cotton cloths cut to approx 1 x 2 cm (depending on the cloth thickness the mileage may vary) and pull it half way through the hole of the needle.
- Do not rotate the rod inside the barrel
Let the cloth all the way through the barrel before changing direction (first push it all the way through, then pull it back all the way out) For a better print quality It is recommended to print split versions and glue the halves together.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
No
Supports:
No
0.20
Notes:
- ABS or PET Print split parts and glue them with super glue or acetone Cut threads on both sides using M3 thread cutter and a thread tap Post-Printing
Make M3 threads on both sides using thread cutter and thread tap, and some silicone oil or grease.
Even though I don't recommend that, if you don't have a tap & die thread set, you can shorten the pin by 8 mm and (hope to) use friction to keep the parts together.
Category: Sport & Outdoors