Airsoft Gearbox V2 Grip Spacer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
When mounted and screwed onto a gearbox, a pistol grip should never be touching the receiver body. When that happens,…
- Ocena
- 0 / 5
- Polubienia
- 37
- Pobrania
- 487
- Wydruki
- 0
- Wyświetlenia
- 2795
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
When mounted and screwed onto a gearbox, a pistol grip should never be touching the receiver body. When that happens, the screws in the grip pull down the gearbox messing up the proper positioning of a gearbox within a receiver and the angle of bevel-to-pinion gears.
One way to prevent the contact between the grip and the gearbox is to file down the top edges of the grip, but that requires extra work, precision and the end result will always be uglier than before filing.
These washers solve that problem. Just print one in a required thickness and place it between the grip and the gearbox - and off you go. I recommend starting with the 0.6 mm one.
See this excellent tutorial on shimming: https://www.youtube.com/watch?v=m0yU-\_prZyY
UPDATES
2020-03-06
- Screw holes widened
- Motor hole widened
- Added cuts on wire holes
- Added 1.2 mm thickness
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
No
Resolution:
0.2
100%
Notes:
- PET or ABS
Category: Sport & Outdoors