1 / 3
Cyma CM.030 Hopup Arms for R-Hop — zdjęcie 1
1 / 3

Cyma CM.030 Hopup Arms for R-Hop

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

If you are making an R-Hop for your Cyma CM.030 (Glock 18C) and you would like to keep your original hop up arm…

Ocena
0 / 5
Polubienia
9
Pobrania
54
Wydruki
0
Wyświetlenia
658
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Sports
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

If you are making an R-Hop for your Cyma CM.030 (Glock 18C) and you would like to keep your original hop up arm intact, or if for whatever reason you would need a replacement part, this is the model you are looking for.

Use first a 1.3 and then a 1.5 mm drill bit to clear the hole if you print on an FDM printer, but be careful not to break the hinge in the process. You can put the hinge in a vice to prevent it from breaking while turning the drill bit.

Material

I used ABS since I found it being more rigid than PET. I've tried those printed in PETG, but they bend to one side when pressed down by the hopup adjustment wheel. A quick acetone vapor smoothing treatment also helps to improve the material performance.

Don't take my word for it - try it and see which one works best for you. It also depends on filament brand.

Just don't use PLA - it will melt and bend on the first hot day.

Variations

  • Flat A - original shape, no U-nub, for R-hops and similar. Due to a thin arm it tends to bend.
  • Flat B - original shape no U-nub, with a strengthened arm to prevent bending.

    Print Settings

Printer Brand:

Prusa

Printer:

I3 MK3S

Rafts:

No

Supports:

Yes

Resolution:

0.10

Infill:

100%

Notes:

  • ABS (since it is more rigid than PET and can withstand higher temperatures than PLA) I tried one printed in PETG, but it would bend to one side

Category: Sport & Outdoors

Tagi