Gridfinity "Engineer Tools" 3 Crimp tool holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gridfinity Engineer Tools 3 Crimp tool holder for use with 3-draw Milwaukee Packout
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 12
- Wydruki
- 1
- Wyświetlenia
- 151
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
I have just moved over to use the excellent Milwaukee Packout Storage system for my hobby/3D printing room. I am using gridfinity within them for both tools and parts storage.
I think “Engineer Brand” tools are very good value for money, and I have managed to create this vertical holder for a PA-09, PA-20(which are the same thickness) and a PA-24 (Snugg Fit - smaller partition) crimp tools. If you are only going to buy one crimp tool for your Voron builds, I find the PA-24 to be the most flexible.
The model uses a 1x5 grid base (created with the Fusion 360 Plug-in) and 6x3 magnets.
The dividers are 1.2mm thick and printed in eSun red PLA (to match the Milwaukee Packout Boxes).
The holder is 62mm tall and steps down to 37mm, which fits in a 3 draw Milwaukee packout using a grid also created using Fusion 360 (skeleton and magnet options)
I have used the recommended gridfinity print settings with a 0.4 nozzle https://all3dp.com/2/gridfinity-simply-explained/