1 / 1
Gridfinity holder for Proxxon Heat Gun Nozzles — zdjęcie 1

Gridfinity holder for Proxxon Heat Gun Nozzles

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple 1x3 Gridfinity bin to hold the nozzles for the Proxxon heat gun

Ocena
0 / 5
Polubienia
3
Pobrania
28
Wydruki
0
Wyświetlenia
97
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial

I have just moved over to use the excellent Milwaukee Packout Storage system for my hobby/3D printing room.  I am using gridfinity within them for both tools and parts storage.

This design provides storage for the 3 nozzles I have for my proxxon heatgun that I use for heat shrink. 

The model uses a 1x3 grid base (created with the Fusion 360 Plug-in) and 6x3 magnets.

It is printed in eSun red PLA (to match the Milwaukee Packout Boxes).

The holder is 24mm tall(68mm needed for the wide nozzle) and just fits into a 3 draw Milwaukee packout using a grid also created using Fusion 360 (skeleton and magnet options).

I have used the recommended gridfinity print settings with a 0.4 nozzle https://all3dp.com/2/gridfinity-simply-explained/ 

Tagi