Covertec Button (for various hilt diameters)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement Covertec-style button for M4 screw with lens-head (flat base, round top). I usually use Allen (hex)…
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 111
- Wydruki
- 2
- Wyświetlenia
- 424
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution
A replacement Covertec-style button for M4 screw with lens-head (flat base, round top). I usually use Allen (hex) screw.
It consists of two parts that snap-in together. While the top part is always the same, there are several options for the bottom part:
- Original flat-bottom style
- Curved bottom for hilts of diameters Ø33, Ø34 Ø35, Ø36, Ø37, Ø38, Ø39 and Ø40 mm
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Mk2
No
Supports:
No
0.15
Infill:
20%
Notes:
- Print in PLA for smoother finish
- There are thin membranes on both parts above the drill holes, sono support is required (I use Slic3r). Use a 4mm drill bit to puncture the membranes after the printing.
Before printing you should perform the Part Fitting calibration <https: thing:2372705="" www.thingiverse.com=""> Post-Printing
Bridging Membranes
There are thin membranes on both parts above the drill holes, so no support is required (I use Slic3r). Use a 4 mm drill bit to puncture the membranes after the printing.
Puncture the bridging membranes with a 4 mm drill bit
Category: Toy & Game Accessories