Button / Lever for SIGG Bottle Lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Not the latch, but the replacement button for SIGG bottles.
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 83
- Wydruki
- 5
- Wyświetlenia
- 224
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
This is not my own design. I found it on Thingiverse, created by user bodoba. The original part on these Sigg bottles is not strong enough and I saw it breaking on multiple bottles. On Printables, I found multiple latches for the Sigg bottles, but not the button. Hence, I am glad somebody designed this part as a replacement.
If you plan to wash it in the dishwasher, you may want to print it in ABS or ASA as it can withstand more heat. Otherwise standard PLA or PETG should be fine.
I printed it with ASA on its side (with support enabled), to give the hooks the best stability.
To replace the old part, you will need something pointy to drive the pin out and a pair of pliers. Push/pull it out just enough for the broken part to come lose. Take care to not loose the spring located right behind it.