1 / 3
Dc motor 360-3045 support
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a dc motor 360-3045 support!
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 165
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This is a dc motor 360-3045 support (motor diameter: 27.5mm motor lenght: 35mm) that I created from Fusion 360. I know that maybe is not one of the best support, but I'm not very good in 3d drawing...
You will need also 2 screws M2.5 (not self-tapping) and also 4 M3 screws with 4 washers (with 3mm hole) and 4 M3 screw nuts, I think that not self-locking is better due to the small space (there are 4 adjustable holes on the bottom, to fix the support through the M3 screws on other things).
I hope you will enjoi it!
It's an old model, so is not 100% optimized