1 / 3
BigTreeTech SKR-PRO v1.2 and TFT35 v3.0 Enclosure
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D printable enclosure for the BigTreeTech SKR-Pro v1.2 controller and TFT35 v3.0 touchscreen LCD
- Ocena
- 4 / 5
- Polubienia
- 29
- Pobrania
- 263
- Wydruki
- 0
- Wyświetlenia
- 1751
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (8)Wydruki i komentarze (Wydruki: 0) (Komentarze: 5)Remiksy (1)Kolekcje (34)Powiązane
3D printable enclosure for the BigTreeTech SKR-Pro v1.2 controller and TFT35 v3.0 touchscreen LCD
Project Repository Link
Head to the project repository for the latest revision of this model along with full assembly instructions and CAD source documents.
This project offers a 3D printable enclosure for a combination of the BigTreeTech SKR-Pro v1.2 controller along with a TFT35 touchscreen LCD. Highlights:
- All models are provided in print orientation and require no supports
- M3 fasteners are used throughout and M3 nuts are used to securely fix them in place
- The pedestal mount allows for internal cable routing and can be rotated, allowing the enclosure to be mounted horizontally or vertically
- Mounting holes are provided on the bottom of the enclosure for countersunk #8 wood screws
- Mounting holes and fan grill provided for 40mm fan
- Cable egress slot over stepper connectors
- Access to reset buttons on controller and LCD
- Access to SD cards and USB ports on controller and LCD
- An optional model is provided with a light pipe, allowing the TFT35 LEDs to be iluminate the control knob
- Source CAD model provided and the project is permissively licensed