Remix of OpenFlightSimConsole Flaps lever
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I remixed this brilliant design of a flaps lever for an Airbus A320, but made some changes.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 118
- Wydruki
- 0
- Wyświetlenia
- 548
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I remixed this brilliant design and the technical implemenation under following preconditions:
- Simplification
- Print more and buy less
- all my modules for my Flight Simulator Homecockpit should be totally self-sufficient and stable, even when not mounted to a plate or any housing. Therefore every module has its own small front plate, with which it will be mounted to a housing.
But i totally kept the original size, geometry, function and more or less design, therefore the original INO-file is still working.
Instead of one frame i created a left and right one, on which is the lettering for flaps level.
BOM
Due to my preconditions the BOM is a little bit easier to fulfil
4 x M4x8 (for mounting the frames to the front plate)
2 x Grub Screw M3x4 (to fix the rod on the pivot block and to fix the block to the poti-axis)
2 x Grub Screw M3x10 (the blocker parts left and right)
1 x Rubber ring with approx 3cm diameter (instead of a hard to find spring)
1 x 10kOhm Poti of course)
Update May, 13th.
I do not use the original Arduino Code but my own one, which is part of my “Main Pedestal” Objekt.
Update August, 4th, 2026
The left and the right bracket were replaced. Now they are in Bambu Lab 3MF format and they are printable with an AMS in 2 colors.
If you don't have an AMS, export the 3MF as STL and print it like you wish.