Bottle drying shelf with three pins and holes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified the beautiful and sturdy original model with addition of vertical pins, which securely hold bottles and jars…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 113
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Modified the beautiful and sturdy original model with addition of vertical pins, which securely hold bottles and jars with neck diameters up to 4cm. I also added holes for water sintering and air circulation. If you need to dry wider dishes, the prongs can be made even higher.
Use with #5 screws.
The pins require supports for printing, do not add supports to the holes, you will have a hard time forging them out.
We use the shelf in the biology lab, but it can be useful at home as well.
The shelf is also available as FreeCAD (0.21.2) source file should you require modifications.
Print Settings
Printer Brand:
Flsun
Printer:
Flsun V400
No
Supports:
Yes
0.2mm
Infill:
30% cubic
Notes:
Supports are needed only for the pins.
I used FreeCAD (0.21.2) to add pins to the model.
Category: Kitchen & Dining