1 / 4
TTGO T-Beam v1.0 Enclosure
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
TTGO T-Beam v1.0 Enclosure This is an enclosure for the TTGO T-Beam with OLED version 1.0. All credit goes to the…
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 113
- Wydruki
- 0
- Wyświetlenia
- 1471
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- GNU General Public License v2.0
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (16)Powiązane
TTGO T-Beam v1.0 Enclosure
This is an enclosure for the TTGO T-Beam with OLED version 1.0. All credit goes to the SoftRF project for the original design.
Remixed features
This enclosure has been generalized for use outside of the SoftRF project. This remix includes the following changes:
- Enclosure body has been widened by 1cm, allowing for use of pin headers and cables inside the project.
- Push-buttons added for all 3 buttons on the device (Power/Button/Reset)
- Re-alignment of OLED to fit T-BEAM 1.0
- Opening for LED removed as the T-BEAM 1.0 has moved the LED location
- Support for M2 countersunk machine screws and threaded inserts for reliable fastening.
- Cleanup of overhangs to allow printing without supports. STLs are provided in the correct orientation for printing.
Parts oriented to allow for textured print beds, such that textured surfaces will face "out" when printed in the provided orientation.
Bill of Materials
- Qty 1 TTGO T-Beam with OLED
- Qty 1 18650 battery
- Qty 4 M2 countersunk machine screws (5-35mm length will work)
- Qty 4 M2 threaded inserts