1 / 6
140mm Max Airflow Fan Housing for Sim Racing — zdjęcie 1
1 / 6

140mm Max Airflow Fan Housing for Sim Racing

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

These fan housings are for use with 140mm fans mounted to a sim racing cockpit.

Ocena
0 / 5
Polubienia
38
Pobrania
183
Wydruki
0
Wyświetlenia
2587
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Video Games
Licencja
Creative Commons — Attribution

These fan housings are for use with 140mm fans mounted to a sim racing cockpit. These fans can be used with SimHub Dashboard to control left/right fan speed in response to your speed in a supported game.

The rear inlet has been optimized for minimum pressure loss (K <= 0.05), while the front outlets have flow straighteners to "project" the flow towards the user. The fan housing has been designed around the Noctua NF-P14s redux-1500 PWM fan, but should work with other 140mm standard fans that are 25mm deep.

The included mounts are designed for M6 bolts @ 60mm spacing and provide for tilt and yaw adjustment of the fan. "Stub" mount models for the fan housing and the mount are included, and which can be joined to existing models in your slicer.

Notes:

Models should be in print orientation, and no supports should be required. The inlet models are pretty large, you can shave off a lot of time by using modifier meshes in PrusaSlicer to make the "bell" of the inlet print w/ zero infill and 1 perimeter while leaving the top/bottom of the model around 15-20% infill

Tagi