Pixel 3 USB C Charging Dock and Brodit Swivel Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pixel 3 Phone Mount This is a USB-C charging base for the Pixel (non-XL) 3 phone. It is designed to be compatible with…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 68
- Wydruki
- 0
- Wyświetlenia
- 571
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution
Pixel 3 Phone Mount
This is a USB-C charging base for the Pixel (non-XL) 3 phone. It is designed to be compatible with the Brodit ProClip line of custom car mounts.
To use this, you'll need the following items:
- Brodit mount for your vehicle (or design your own)
- Right-angle USB C cable
6 x 8m M3 self-tapping screws (may be included with your ProClip if you buy one)
Brodit Swivel Base
The swivel base makes use of the excellent Locking Ball and Socket Arm design from @alexrich82. Mount it to your vehicle's ProClip base, adjust to the desired position, then use a 20mm wrench (or print the included model) to lock the joint into position.
Printing
This model was designed for use with PETG filament. I've had good luck with Amazon Basics PETG, you're going to want some give in the finished print for this to work right. All STLs are provided in the orientation which printed well for me, without rafts or supports.