AKG Headphones Flat Cover Face Replacement - Open/Closed (Q701, K701, K702, K712)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I took apart my K712's to replace the elastic band and discovered how easy it is to take off the small rounded mesh…
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 75
- Wydruki
- 1
- Wyświetlenia
- 855
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution
I took apart my K712's to replace the elastic band and discovered how easy it is to take off the small rounded mesh covers. I never liked how they looked -- I always wished they were flat. Now that I have a 3D printer I can fix that "problem".
The "open" part is my design that I'm using. I've included a "closed" version that you can either use as-is, or cut your own design into. A personal logo or L/R are some ideas.
Should fit pretty much all of AKG's reference headphones, but I've only tested mine cause that's all I have.
The printed part should press fit into place and stay relatively snug.
Category: Music