1 / 1
NiteRider Mako 250 Bike Light Mount (UPDATED V2) — zdjęcie 1

NiteRider Mako 250 Bike Light Mount (UPDATED V2)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Handlebar mount for the Mako 250 light (and similar models).

Ocena
0 / 5
Polubienia
6
Pobrania
51
Wydruki
0
Wyświetlenia
244
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

My bike with the original mounting bracket got stolen, so I reverse-engineered this so I (and hopefully you) don't have to buy a new light. Most handlebars will use the 31.8mm standard, but there is also a 25.4mm version if necessary.

Designed to use a single M4x12mm screw and matching hex nut, although I'm sure you could make it work with something similar. Be careful not to overtighten as you may crack the bracket. Just tighten it enough so that it is reasonably difficult to twist the bracket around the bar, but not impossible.

I recommend printing in PETG or ABS, no supports are necessary if printed with the hole face down.

Tagi