folding ladder to horse mounting aid conversion kit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a set of printed parts for a conventional household folding ladder to make it better suited as a hose mounting aid
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 151
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
a set of printed parts to attach to a conventional household folding ladder to make it better suited as a hose mounting aid
there are
- caps for the “bottom front” - the part that touches the ground on the side you climb the ladder
- caps for the “bottom rear” - the part that touches the ground on the side opposide side of where you climb the ladder
- caps for the top if you decide to cut the ladder "handle"
- a complimentary replacement handle to grab the ladder if you cut the handle
the bottom caps prevent the ladder from slipping and sinking in on sand - where the ladder will be used most
made for ~25,5 mm diameter tubes that have an angle of ~ 65° to the ground
all bottom caps have screw holes in them to be attach to the metal tubes with stainless steel screws
the top cap as well as the replacement handle are not tested yet and should slide over the metal tube of the ladder if you decide to cut of the top handle - see the render in the last photo
print from a environmentally resistant and tough material - the caps for the bottom rear have to flex quite a bit during assembly
printable without support - please reorient the ones that got messed up during export