StreamStack XL 2.1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A big upgrade to the Stream Deck Stacker designed to securely hold two Stream Deck XL button boxes.
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 240
- Wydruki
- 0
- Wyświetlenia
- 1209
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a major upgrade to my original Stream Deck stacker. It holds two Stream Deck XL button boxes. I have redesigned the angle to be easier to read at 55° off vertical. I found the lower one hard to read with complex buttons on Flight Sim 2024 Stream Deck profiles. They fit fairly close, but not excessively tight. There is a cable pass-through on both sides and the back. The bottom has 12 mm flat-bottomed indents for stick-on silicone feet so it stays put on your desk. I was inspired by. https://www.printables.com/model/681139-two-stream-deck-stand. You will likely need supports no matter how you orient it.
The files include .stl, .3mf, and .step file formats for the stacker. If you do 3D modelling, you will know what to do with them. Cheers!