1 / 4
Auto World to Tyco US-1 Truck Hitch
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
To use an auto world trailer with a Tyco US-1 truck
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 98
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
I wanted to use my auto world trailer with my Tyco US-1 trucks. So I made this. The original hitch can be stored on top, inside the trailer.
It sits a tiny bit high in the front, but short of having the trailer sit directly on the hitch, this is unavoidable. The separator is 1.5mm thick.
It will not work with old Aurora trailers, since the hitch peg is part of the trailer. You could drill a hole in it if you wanted to make it work, though.