1 / 4
Bettle Roof with Walksnail 1s
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
for the furitek bettle body and walksnail 1s
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 100
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
I found this roof and used it as a starting point to add FPV to a Bettle body. The camera is held in place with one of the many mounts you can find for the walksnail 1s. The cover is just to keep the exposed vtx from taking a hit when it rolls over. I used 1.7 x 10 screws to hold it down.
I also added a fan and used longer screws to hold it in place. Here is the link to the fan on amazon: https://a.co/d/5ZbPTIV
Even though it says it's a 5v fan, I'm running it directly off my battery at 8v and so far no issues, however do that at your own risk.