1 / 10
OctoPi Case for Prusa i3 MK2S and MK3 with exposed GPIO ports — zdjęcie 1
1 / 10

OctoPi Case for Prusa i3 MK2S and MK3 with exposed GPIO ports

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I just sliced a part away so you can connect to the GPIO contacts...it's the same as this one…

Ocena
0 / 5
Polubienia
3
Pobrania
36
Wydruki
1
Wyświetlenia
663
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

I just sliced a part away so you can connect to the GPIO contacts...it's the same as this one https://www.thingiverse.com/thing:2334119

The USB cable in the picture is connected to the printer, I needed the GPIO ports for https://www.lisiparoi.com/

I've updated the case to fit M3 or M2.5 bolts through, just pick the lid and base with the corresponding M notation. M2.5 wont grind into your Rpi board...O, and do not overthigten.

---Update---

The MK3 frame is a little bit narower, so I've reworked the lids for the MK3

---Source Files---
Base_Rasp2
Base_Rasp2_Nut_M2.5
Base_Rasp2_Nut_M3
Lid MK2
Lid_MK3
Lid_MK3_nut_m2.5 v4
Lid_MK3_nut_m3 v1
Lid_nut_m2.5
Lid_nut_m3

Print instructions

Category: 3D Printer Accessories Print Settings

Printer Brand: Prusa

Printer: i3 MK2S

Rafts: No

Supports: No

Resolution: .15-.20

Infill: 20%

Notes:

Printed Bottem in PLA and Top in PETG...

Post-Printing

Installation

Hardware requirements/installation

4x M3x16 screws for the case
2x M3x8 screws for attaching the case to the frame.

The M3 Nut version needs 4x M3x20 instead of M3x16
The M2.5 Nut version needs 4x M2.5x20 instead of M3x16

First install the Lid.stl onto the frame using the two M3x8 screws. Then attach the Base_Raspi2.stl.stl to the lid using the four M3x16 screws.

Tagi