MT Thunder 3 Helmet GoPro mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
MT Thunder GoPro Chin mount with lens center mount, stable mount in X,Y axis stability in concise space for chin mount.
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 226
- Wydruki
- 0
- Wyświetlenia
- 915
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Costume Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This design is specifically designed for MT helmets, ive used it on my Thunder 3 for my hero 7 mounting on chin. this also includes gopro lens centering mount to adjust gopro lens in center of helmet. This design fixes that problem for the people who want their GoPro lens aiming straight down whatever it is mounted to.
Instructions
Material : PETG
Infill : 15-20%
Wall : 5- 7
NOTE : Might require to heat the part mounting about 180°c for 3-4min to get little soft and you can curve it to your helmet for perfect fit
I used a high wall so the part gets out sturdy in linear wall infill for safety.
for lens center mount will recommend walls of 9 instead of any other infill
Good 3M double sided tape should hold it tight.
add Brim of 5mm if required.
You need a M5(5mm) end cap nut for mount to be screwed tight or can take out from left over gopro mounts
Category: Camera mount