Robust tablet holder (I-Pad) for home bike or trainer (landscape or portrait)» #NoSupportNeeded
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a tablet holder for a home bike trainer or similar. Attachable to a bike handle bar diameter 26 mm .
- Ocena
- 5 / 5
- Polubienia
- 44
- Pobrania
- 301
- Wydruki
- 1
- Wyświetlenia
- 2588
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Universal tablet mount for home trainer bikes or similar. There are two versions available to download, one for landscape and one for portrait. Only two parts differ for the two versions.
In “Other Files” you will find the Assembly Documentation.pdf which contains the assembly instructions.
All tablets within range of 260 mm x 180 mm mm width should fit. The tablet sits very safe due to solid design.
Bike handle bar diameter on test bike is 26 mm, for smaller handle bar pipes just use double sided tape to increase tightening force.
It was tested with a I-Pad Gen. 10 (2022)
For playing Zwift which only works in landscape mode I added longer versions of coupling_bar and bottom_rail (190 mm instead of 130 mm).
#NoSupportNeeded: Parts can be printed without support
Not tested if it is stable enough for outdoor use, so it is not recommended.
If you would like mount the tablet holder on different handle bars then please let me know the dimensions. I might be able to release some updates or additional parts.