Wrapping Wire Spool Clamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
59.80mm clamp for spools electronic wire. I use those on wrapping wire spools that have ~65mm diameter of wire when new.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 212
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Made for 65mm rolls, if printed in PETG, this model is rather flexible and will accomodate multiple diameters. You also still can heat up the clamp and make it smaller as your spool diameter decreases. Thanks to the slot, you can unroll the wire properly, without creating knots or tangling the spool.
This single core wrapping wire is super useful for projects.
I got mine here and I use it with this magic tool that allows doing electronic projects… without any solder.
The model is trivial to print: no support, no skirt, no nothing :)
The model is 20mm wide but should you need a narrower version, it will be trivial to cut the model in your slicer as there are no chamfers.