1 / 2
60mm Mainboard Fan Bracket for Anycubic i3 Mega
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Drop in replacement for stock fan bracket to replace the stock 50mm fan with a 60mm fan for better mainboard cooling.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 82
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- GNU General Public License v3.0
This bracket allows you to mount a 60mm fan onto the mainboard of the Anycubic i3 Mega, providing better cooling and airflow to prevent overheating during extended printing sessions. This fan bracket provides efficient cooling to the i3 Mega’s mainboard and is designed for easy installation.
Materials:
- 2x M3x10mm screws (for mounting the bracket)
- 2x M3x15mm or 20mm screws (depending on the fan size)
- 4x M3X4X5 heatset inserts
Recommended Filament:
- ABS, PETG, ASA (avoid PLA as it may warp from heat)
Print Settings:
- Layer height: 0.2mm
- Perimeters: 4
- Top/Bottom solid layers: 4
- Infill density: 30-40%
- Infill pattern: Gyroid or Honeycomb for added strength and airflow
Instructions:
- Print the bracket with a high-temp plastic like ABS, PETG, or ASA to withstand the heat near the mainboard.
- After printing, install the 4 M3X4X5 heatset inserts into the bracket's holes.
- Secure the 60mm fan to the bracket using the appropriate M3 screws (M3x15mm or M3x20mm depending on the thickness of your fan).
- Attach the bracket to the mainboard using the two M3x10mm screws, ensuring a snug fit.
- Make sure all screws are secure, but avoid overtightening to prevent damaging the components or the printed bracket.