SCS Small Card Slinger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My variant of a smaller CS1.0 with phone holder and holder locking feature.
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 346
- Wydruki
- 1
- Wyświetlenia
- 1846
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hi, this is my take on the Card Slinger 1.0 and the Card Slinger 1.0 Phone Stand Add-On combined.
Its smaller cause I dreaded the long printing time.
While moddeling I thought about that people, me included, might prefer a version without a bottom for easier unloading. You need to do that more often cause it smaller.
It should hold around 100 Cards, i tested it with very old and “fluffy” Yu-Gi-Oh cards and it held around 75 before i needed to empty it.
Be aware the version with a bottom is 0.5mm shallower so you lose a few cards of volume.
The locking feature is experimental so I uploaded both versions, with and without.
For best/fastest scanning results use white or high contrast filament to make it easier for the scanning app.
SCS = SmallCardSlinger
PH = Phone Holder
B = bottom
L = lock
Example: SCS1_L+PH1_L
Small Card Slinger 1 without Bottom, with Lock + Phone Holder 1 with Lock
Size of SCS1+PH1 is 139.9mm x 95.5mm because I wanted it to be able to print on a Flashforge Finder 2.
If you have any complaints or ideas to make it better, please leave a comment.
Also please go and visit the originals and give them a like, they deserve it and are what inspired this version.