1 / 5
Planfrasvorrichtung-für-Makita-RT0700C — zdjęcie 1
1 / 5

Planfrasvorrichtung-für-Makita-RT0700C

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Planfräsvorrichtung für SBR16 Linearführungsschiene modifiziert. Face milling device for SBR16 linear guide rail modifie

Ocena
0 / 5
Polubienia
15
Pobrania
71
Wydruki
0
Wyświetlenia
832
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Erst einmal vielen Dank an den Ersteller  der Vorrichtung.
Für meine bestehende Planfräseinheit (Lienearführung SBR16 1500mm x 1000) habe ich den "Fräskorb" und die "Läufer Quer" so angepasst dass diese mit den Linearführungsschienen SBR16 und den Lagerblöcken SBUU16 kompatibel sind. So konnte ich meinen alten Fräskorb aus Holz der nicht höhenverstellbar war durch diesen ersetzen.
 

Nachtrag:
Habe die normalen Rändelschrauben durch Rändelschrauben L-Typ/T-Typ Schmettelingsform
ersetzt.

---------------------------------------------------------------------------------------------------------------

First of all, many thanks to the creator of the device.
For my existing face milling unit (linear guide SBR16 1500mm x 1000) I have adapted the “milling cage” and the “cross runners” so that they are compatible with the linear guide rails SBR16 and the bearing blocks SBUU16. This allowed me to replace my old wooden milling cage, which was not height-adjustable, with this one.


Addendum:
I have replaced the normal knurled screws with L-type/T-type butterfly-shaped knurled screws replaced.