Decals 3D Cabin A6M2 ZERO 3DLabPrint, 0.2mm height
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
They are 3d models with a height of 0.2mm, but I printed them with a height of 0.15mm for the windows of the A6M2 ZERO p
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 32
- Wydruki
- 1
- Wyświetlenia
- 120
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Public Domain
I converted the pdf file into an svg file. And in fusion 360, I just made a sketch of the svg and extruded with 0.2mm.
I have also attached the f3d file in case changes are desired.
On my ender 3 V3 SE I printed with the help of Cura with the following:
Layer Height: 0.2mm
Initial Layer Height: 0.15mm
Line Width: 0.4mm
Wall Line Count: 3
Wall Ordering: Outside To Inside
Print Thin Walls: Yes
Minimum Feature Size: 0.001
Skin Removal Width: .42mm
Printing Temp: 215
Flow: 102%
Print Speed 55
Surface Mode: Normal
Notice: I personally glued the central parts C3 and C4 to the canopy instead of parts C5 and C6!!