Laptop holder behind monitors
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Can hold high performance Lenovo P16 Gen2 laptop behind monitor to make use of the laptop display above 2 main monitors
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 437
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
This Laptop holder can hold Laptops like my work laptop which is a Lenovo P16 Gen2 (workstation Laptop which is quite thick and heavy). The gap for putting in the Laptop is 30 mm wide, which is enough only for the P16 in case it is unfolded, but this was the goal I wanted to see the Laptops display on top of the two main monitors I use.
I created this holder to perfectly fit onto this monitor arm/holder from RICOO:
https://www.amazon.de/gp/product/B07DP4Q1PW
Besides the holder there are 2 of these monitors:
https://www.amazon.de/gp/product/B07XLXPDK7
In the pictures you can see that the part "FrontTop" was about 15mm too short at my print, I just added some M6 nuts to increase the height by ~15mm which works for me so far. This issue was fixed in the latest models I uploaded here.
Printed it with my Prusa MK4S printer using Prusament PETG, setting 0.28mm DRAFT