1 / 3
Ryobi RY25AXB Gas Powered Jet Blower Upright Stand — zdjęcie 1
1 / 3

Ryobi RY25AXB Gas Powered Jet Blower Upright Stand

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Bolt on support stand to store or work on blower

Ocena
0 / 5
Polubienia
1
Pobrania
8
Wydruki
0
Wyświetlenia
83
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

While rebuilding the turbine section of the blower it was too easy to tip over standing on the end. I made this piece to give it the support it needed for me to work on it. This support piece can be easily added and removed. Can be used for upright storage. It uses one 4mm screw through the threaded hole.

Basic printer settings, about 1 ½ hour print, used Lutzbot Green PLA on Creality S1.