Radiomaster 4in1 module back plate for Literadio 3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement back plate to allow the RM 4in1 module to fit on a BetaFPV Literadio 3.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 219
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
This is a replacement deep back plate for the Radiomaster 4in1 nano module since Literadio3's module bay is far too deep for non-BetaFPV modules to fit.
Print with 0.2mm layer height, arachne wall generator and with the antenna port down on the build plate. No additional supports are needed. Snap the thin rib supporting the screw boss off and it's ready to install.
The rear pcb goes in first and is secured by a screw, then the antenna needs to be inserted, and then finally the main PCB slides under the antenna before the front plate is put on and screwed down.
CAD model is available in OnShape: https://cad.onshape.com/documents/86e65951a7a8fe965e060c9f/w/bf485456e9c7b23c01853e68/e/c92d8a65a96aa15fb1ff260a