Model of a belt pulley system
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I use this model to learn how to use some tools and how a belt/pulley system work.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 259
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution
Context:
I designed this model for a course where my students learn how to use tools in our workshop and understand how a belt and pulley system works.

In 6 hours they have to learn how to use:
- Mechanical tools (screwdriver, allen key, pliers, saw, cutter)
- Handled power tools (circular saw, jigsaw, drill, orbital sander)
- 3D printer
- Laser cutter
- Plastic bending machine
Once they learn how to fasten parts together (with bolts, nuts or wood glue), they build belts from old bike inner tube for three different setups.
- From a 50mm pulley to a 50mm pulley spaced 125 mm apart.

- From a 50mm pulley to a 100mm pulley spaced 162.5 mm apart.

- From a 50mm pulley to a 200mm pulley spaced 200 mm apart.

At this step, they build all the needed part and can study rotation from one pulley to an other using the previous situation. By the end, they should understand the speed ratio between two pulleys.
Material list:
You will find below a list of the needed materials.
In my case, i used all the tools we have (handled power tools, 3d printer and laser cutter) but it is possible to 3D printed most of the parts (except bolts, nuts, and belts).
Unprinted parts:
- 1 Medium or plywood board 350x350x10mm
- 1 acrylic board 200x175x3mm
- 1 Wooden beam 28x28x220mm
- 2 Old bike inner tube
- 34 M3x20 bolts
- 34 M3 nuts
- 2 M10x50 bolts
- 2 M10 nuts
- 8 M10 spacers
Printed parts:
- 2 pulley_50mm.3MF
- 2 spacer.3MF
Acrylic board laser cutted parts:
- 12 belt_guide_200.dxf
- 1 belt_guide_200_0.dxf
- 1 belt_guide_200_90.dxf
- 1 belt_guide_200_180.dxf
- 1 belt_guide_200_270.dxf
- 12 belt_guide_100.dxf
- 1 belt_guide_100_0.dxf
- 1 belt_guide_100_90.dxf
- 1 belt_guide_100_180.dxf
- 1 belt_guide_100_270.dxf
- 1 measurement_gauge.dxf
Drawing of wooden parts cut with handheld power tools:
- 1 support.pdf
- 2 model_stand.pdf
- 1 pulley_100.pdf
- 1 pulley_200.pdf
Plastic bended parts:
- 1 measurement_gauge
Optional printed parts if you don't have a laser cutter:
- 12 belt_guide_200.3MF
- 1 belt_guide_200_0.3MF
- 1 belt_guide_200_90.3MF
- 1 belt_guide_200_180.3MF
- 1 belt_guide_200_270.3MF
- 12 belt_guide_100.3MF
- 1 belt_guide_100_0.3MF
- 1 belt_guide_100_90.3MF
- 1 belt_guide_100_180.3MF
- 1 belt_guide_100_270.3MF
- 1 measurement_gauge.3MF
Optional printed parts if you don't have handled power tools:
- 1 support.3MF
- 2 model_stand.3MF
- 1 pulley_100mm.3MF
- 1 pulley_200mm.3MF
Changelog:
v1:
original design
v1.1:
change the number of belt guide per pulley from 18 to 16.
Marked 4 belt guide with specif angle (0°, 90°, 180°, 270°)
Next idea:
- Increase belt guide length to reduce bolts and nuts number.
- Add a rotation counter for each pulley